Sling length & headroom Calculator

Solve length or vertical rise for equal two- or four-leg sling geometry.

How to use this calculator

Choose two equal legs or four equal legs, then solve for sling length from the required vertical rise, or solve for rise from the available sling length. For two legs, enter the distance between the two effective lifting points. For four legs, enter the length and width of the actual rectangle formed by the four effective lifting points. These are not automatically the overall load dimensions.

The common connection must be vertically above the centre of the level lifting points. Measure sling length between effective bearing points. Allow separately for the hook, links, shackles, block dimensions and required clearance.

Enter project-specific values in the form below. Blank or out-of-range inputs stop the calculation. Reset restores an illustrative example, not verified project data. Keep the input sources, assumptions and worked calculation with the result when exporting the PDF.

Formula and assumptions

Two legs: r = span / 2. Four legs: r = √(span² + width²) / 2. L = √(r² + H²). H = √((L − r)(L + r)). θ = atan2(H, r).

Here r is the horizontal reach of each leg, H is the vertical rise and θ is the angle from horizontal. The angle from vertical is 90° − θ. The two-leg included angle, or the four-leg opposite-pair included angle, is 180° − 2θ. Adjacent-pair angles for four legs are different.

Assumes equal legs, a centred connection and level, symmetrically arranged lifting points. An available length must exceed r to produce a positive rise. The calculator applies a 30° minimum angle from horizontal as its planning-model restriction; this is not presented as a universal standards limit. Geometry does not establish leg load sharing, sling WLL or crane clearance.

Worked example

Horizontal reach: 2 m; length per sling: 3.605551 m; angle from horizontal: 56.30993°; two-leg included angle: 67.38014°.

For four points forming a 4 m × 3 m rectangle with a 3 m rise, r = 2.5 m and each geometric leg length is 3.905125 m. Solve-for-rise returns 3 m when that full-precision length is used.

Illustrative values only. This example is not equipment selection or a recommended operating arrangement.

Example values only. Replace with verified project data.

AI concept: Industrial lifting equipment

CALCULATION OUTPUT

Method & assumptions

Reference / background ↗
AI concept: Planning desk

Take the calculation with you.

Discuss on WhatsApp ↗

Before using the result

Check the actual lifting-point layout and effective bearing-point lengths. A four-leg geometry calculation does not establish equal load distribution or how many legs may be credited for WLL. Confirm the sling assembly, hardware, centre of gravity and manufacturer rating independently. Changes to the arrangement require the calculation and lift plan to be reviewed again.

Continue planning

Related tools: two-leg sling tension · boom geometry and clearance inputs.

Planning information, not lift approval. Confirm applicable Malaysian and project requirements with the responsible parties. No appointment or booking is made automatically.

Engineering method and standards basis

The numeric equations are engineering geometry or an average-pressure model. They are not a certification of compliance or DOSH approval. No standard clause is asserted as the source of the triangle equations or the model's 30° minimum angle restriction.

Check the edition and clauses required by the project. These sources belong to the requested standards families. A publisher listing alone does not establish that a particular calculation is compliant.

Discuss your lift