Hollow pipe mass Calculator

Estimate the empty body mass of a round pipe.

How to use this calculator

Enter outside diameter and wall thickness, not inside diameter. The calculated body excludes contents and end fittings. A measured or manufacturer mass should take precedence over a nominal geometric estimate for a real operation.

Enter project-specific values in the form below. Blank or out-of-range inputs stop the calculation. Reset restores the illustrative example, not verified project data. You can copy or download a result and add a snapshot to a draft lifting plan.

Formula and assumptions

ID = OD − 2t; volume = π / 4 × (OD² − ID²) × length (dimensions in metres).

Empty, uniform round pipe body only. Excludes fluid, caps, flanges, coatings and attachments. Density is a nominal example and must be verified. Pipe schedules and tolerances are not included.

Worked example

Estimated empty mass: 281.1411 kg; Inside diameter: 180 mm; Material volume: 0.03581416 m³.

This example illustrates the calculation method only. It is not equipment selection or a recommended operating arrangement.

Example values only. Replace with verified project data.

AI concept: Industrial lifting equipment

CALCULATION OUTPUT

Method & assumptions

Reference / background ↗
AI concept: Planning desk

Take the calculation with you.

Discuss on WhatsApp ↗

Before using the result

Check units and source data independently. Preserve the assumptions with the result when sharing it; a detached number can be misinterpreted. Changes to the load or equipment configuration require the calculation and surrounding plan to be reviewed again.

Method reference / background

Continue planning

Planning information, not lift approval. Confirm applicable Malaysian and project requirements with the responsible parties. No appointment or booking is made automatically.

References / Rujukan

Choose Malaysian sources or international background. Source links checked: . This is the check date, not the publication date.

Malaysia — JKKP / DOSH

Rujukan tempatan untuk menyusun pelan, peranan pasukan dan semakan jentera. Bezakan bahan latihan lama daripada peraturan dan proses semasa; semak keperluan yang terpakai dengan pihak projek dan JKKP.

  • JKKP: Reka Bentuk Jentera Mengangkat Selain Lif, Eskalator dan Laluan Gerak

    Official process guidance referring to the 2024 plant certificate-of-fitness regulations. Use this starting point to check applicable design-verification and machinery requirements, including scope and exclusions. A calculation or draft plan here does not establish registration or certificate status.

  • JKKP: Kerja Mengangkat dengan Selamat — poster guidance

    Safety-awareness guidance; not a consolidated legal text. Organise risk assessment, a lifting plan, suitable equipment, trained personnel and supervision. The team overview distinguishes the supervisor, crane operator, rigger and signalman roles.

  • JKKP: Modul Latihan Penyelia Mengangkat (PDF, approximately 25 MB)

    Historical training module dated 30 October 2017. Its planning chapter helps organise load information, crane arrangement, accessories and team responsibilities. The 2025 upload path is not the document date; check older legal references against current requirements.

No fixed inspection interval or universal critical-lift threshold is asserted here. Confirm the actual machine, personnel appointments and site requirements before the operation.

International — background and manufacturer information

  • UK HSE: Planning and organising lifting operations

    UK regulator guidance. Useful background on proportionate planning, responsibilities, supervision and foreseeable risks. It is not Malaysian legislation.

  • Crosby: 2016 catalog sling-angle reference (PDF)

    Manufacturer technical background, historical catalog. Use for the stated sling-angle relationship, not to select current equipment ratings. Confirm the applicable product instructions, hitch and configuration with the actual manufacturer.

  • Liebherr: Crane Planner mobile

    Manufacturer planning service. Configuration-specific crane information is separate from the manual arithmetic calculators on this website. We do not supply or infer its proprietary charts, and this link does not imply endorsement.

International material complements, but does not replace, applicable Malaysian requirements or project review. Tool-specific method references remain alongside each calculator.

Independent reference directory. No JKKP/DOSH, HSE or manufacturer endorsement; no automatic compliance certification or lift approval.

Discuss your lift